Wuhan GDMK Electric Co., Ltd.

Introduction :

3 phase transformer on-load tap changer testeris mainly used to test three-phase transient time, transition waveform, transition resistance, synchronization state, etc. The transformer on-load switch tester is a comprehensive transformer on-load switch measurement and tester, which is used to measure and analyze the electrical performance indicators of power transformers and special transformers on-load tap-changers. The transformer on-load switch tester can automatically capture and display the transition resistance during the transition process. There is also a process of time jumping.

Technical parameters :

Three phase constant current source charge,charge current: 3A/1A; 0.6A/0.2A

Maximum voltage of the port: 24V

Maximum range of transition resistance: 100O

Measuring range: 1A:0.4O~20O 0.2A:10O~100O

Record time of waveform:300ms

Sample rate: 30k

Resolution of time:0.1ms

Resolution of resistance: 0.1O

Accuracy of transition resistance: ±5% Reading±0.1O

Accuracy of transient time: ±0.5% Reading±0.2mS

Temperature: -10-40? Humidity: <85%RH