DURA PRODUCTS INDUSTRIES PTY LTD

Dura Products Industries incorporated in 1991, is one of the founders of Thermoplastic in Australia. To achieve high standard quality, DPI has continuously developed and improved road marking products over 20 years with our valued customers to all rivals.

WHAT WE SELL?

We manufacture and supply quality Thermoplastic road marking materials – spray, extrusion, screed, audible profile, tactile and preform grades in hydrocarbon or alkyd resins systems, in white and various colours as required for all substrates. In addition, we can supply manual screed machines and all types of glass beads to Australian specifications.

WHAT WE DO?

DPI Specialises in consistently producing high quality Hot-Melt Thermoplastic conforming to Australian Specification AS4049.2. We can produce to any other specifications required by customers. Of all various road marking materials available, Hot-Melt Thermoplastic is the most versatile and tested product.

BENEFITS OF THERMOPLASTIC

Hot-Melt Thermoplastic has excellent long-term durability, good day and night visibility and colour brilliance. It is Environmentally safe being non-toxic and Solvent free (zero VOC). And it has exceptional heat stability and high Skid resistance. With rapid, drying time, roads are opened for traffic within minutes after application.

OUR PRODUCTS

DPI Specialises in producing consistently high quality Hot-Melt thermoplastic conforming to Australia Specification AS4049.2/AS4049.4 and we can produce to other specifications required by customers.

PREFORM

Preform are long-life road making materials supplied in sheets, rolls, signs etc for easy layering. Application with a blow torch. We can produce preform thermoplastic in any specification. (E.g.: RTA/RMS Specification ).

EXTRUSION

This is another method of marking edge lines and lane lines with a truck mounted machine or trailer transported unit. Extrusion is also known as ribbon line as the thick thermoplastic is extruded at about 195-215°C through a shoe with set width and thickness required. The hot extruded material is laid onto the road surface where the asphalt and the hot thermoplastic form a bond in contact. Glass Beads and aggregates are applied immediately behind the extruded lines to give initial skid resistance and Retro-Reflectivity.

PROFILE

Profile or audio tactile thermoplastic is a traffic marking system which provides extra safety awareness to road users. The lines give enhance visual and audio effect to warn weary drivers who stray out of the road parameters. It is widely used in highways and in road ‘black spot’ areas to mark lane lines, and edge lines.

SCREED

DPI supplies screed in both Hydrocarbon and Alkyd. It is applied with manually operated equipment. Screed thermoplastic is normally use for transverse lines, pedestrian crossing, symbols, car parks and small jobs. Application temperature is 180-200°C. Glass beads and anti skid aggregates are applied onto the molten applied line to provide immediate anti-skid and Retro-Reflectivity.

SPRAY

We also supply road marking equipment and materials such as Raised Reflective Pavement Marker’s (RRPM's), Temporary RPMs Cat Eyes and more. The product is normally used for long edge lines, lane lines. Application is with a truck mounted spray system. Application temperature is 190-210°C to obtain good end result. Application rate could be as high as 10-12Km. /hour.

ROAD MARKING EQUIPMENT & SUPPLIES

We also supply road marking equipment and materials such as Raised Reflective Pavement Marker’s (RRPM’s), Temporary RPMs Cat Eyes and more.